SUNLU 1.75mm Silk PLA+ 3D Printer Filament 1KG Spool (2.2lbs), Black, Accuracy +/- 0.02 mm

SUNLU 1.75mm Silk PLA+ 3D Printer Filament 1KG Spool (2.2lbs), Black, Accuracy +/- 0.02 mm.Suitable for all models of FDM3D printers. It suitable for printing handicrafts, artwork, industrial design samples and product models with higher toughness requirements. Silk PLA+ filament is a degradable, non-toxic material, close to the silk effect, the toughness of it is  50 times higher than PLA.  Neat winding filament prints smoothly, no tangle.  100% No bubble 3d printing filament. SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. We has our own professional team.

• Brand SUNLU
• Material Polylactic Acid
• Color 1kg Silk Black
• Item Weight 2.2 Pounds
• Item Diameter 1.75 Micron
• ---
• About this item
• 【Shiny Silk PLA】 Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. SUNLU high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
• 【Dimensional Accuracy & Consistency】These tough SILK PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
• 【Clog-Free, Bubble-Free & Easy-to-use】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 210-220℃, bed 60-70℃ .
• 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
• 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20"
• ---
• 
  
• FAQ
• 
  
• Why can't the filaments stick to the hotbed easy?
• 
  
• 1). Check the temperature setting before printing, SILK PLA filament temperature about 220-230℃;
• 
  
• 2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;
• 
  
• 3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
• 
  
• ---
• Tips:
• 
  
• 1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
• 
  
• 2).Be sure to insert the free end of the SILK PLA filament into the holes to avoid being tangled for next time use.
• 
  
• 3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.